grinder

TSCHUDIN HTG 310 UNIVERSAL CYLINDRICAL
GRINDER - NEW 1984

SPECIFICATIONS:
DISTANCE BETWEEN CENTERS: 13.38 / HEIGHT OF CENTERS: 3.94"
TABLE SLIDE - TRAVEL: 13.38"
SPEED RANGE: 0.5M/MIN
TABLE SWIVELLING RANGE: +/- 11 DEG.
WORKHEAD STD:
SPINDLE TAPER: MORSE 4
SWIVELLING RANGE: 360 DEG.
SPINDLE SPEED RANGE: 50-500 RPM
TAILSTOCK: quill TAPER: MORSE 3 / quill TRAVEL: .78"
WHEELHEAD / WHEEL DIAMETER: 14 inches / WHEEL WIDTH (MAX): 2"
WHEEL BORE DIAMETER: 5"
MOTOR POWER: 4 HP
WEIGHT: 3745 LBS

14" x 68" Danobat #RP1600

autocycle,plunge,pick,dwell,sparkout,20"x3"whl.,10 HP, Motor driven with 10 HP; .. 3 phase; 60 cycle; 1 HP workhead; MD hydraulics; MD coolant

USED KELLENBERGER MODEL 1000 U UNIVERSAL
20" X 40" HYDRAULIC CYLINDRICAL GRINDER New: 1973

Swivelling Wheelhead Design, OD and ID Grinding
Maximum swing: 9 7/8" without riser blocks / Maximum swing with 5" riser blocks: 20" / Maximum distance between centers: 45"
Variable work head speeds: 20 to 400 RPM
Grinding wheel size: 16" X 2" X 5" hole / Grinding wheel speeds: 1500, 1700, 2200, 3600 RPM
Grinding wheel head swivels: 270 degrees
90 Degree positive indexing of wheel head
Vertical travel of grinding head: 8 1/2"
Work headstock swivels: 360 degrees
Table swivels: +/- 8 degrees
Variable table speeds: 0 to 240 IPM
Power rapid traverse to wheelhead / Infeed for plunge grinding
Very complete machine,more pics available Weight approx.: 8000 lbs

................................MVC-007 f

.
..Specification Description :
..Swing Over Table: 4"
..Max. Diameter of External Work: 1-3/8"
..Max. Distance Between Centers: 5"
..Wheel Spindle Speeds: 5000 & 6000 RPM
..Maximum Wheel Size: 5" x 1/2" x 3/4"
..Maximum Swivel of Wheelhead: +/- 90 Degrees
..Maximum Wheelhead Traverse: 1-3/16"
..Total Manual Table Traverse: 5-3/4"
..Automatic Table Traverse: .4" to 3.2"
..Automatic Table Traverse Feed Rate, Variable: 0 - 106 IPM
..Table Swivel Adjustment, 1/2 included Angle: +/- 4-1/2 Degrees
..Automatic Infeed at Both Ends of Work, or at Right End of Work Only
..Automatic Infeed Range: .000050" to .0004"
..Manual Infeed, Per Rev. of Handwheel: .020"
..Manual Pick Feed: .000050"
..Automatic Infeed Pre-set "0" Stop
..Headstock Swivels: +/- 90 Degrees
..Headstock Speed, Variable: 0 - 1400 RPM
..Machine Weight, Approx.: 1200 Lbs.

10" x 30", BROWN & SHARPE MICROMASTER

...GRINDS WORK TO HEIGHT OF (WITH 14" WHEEL).....13-1/2"
...WHEEL SIZES...................................14" x 1-1/2" x 5"
...DIRECT DRIVE SPINDLE MOTOR....................5 HP - 1800 RPM
...LONGITUDINAL TABLE SPEED......................10 - 125 FPM
...AUTO CROSSFEED PER TABLE REVERSAL.............0.010 - .500"
...POWER WHEEL TRUING............................10" IPM
...CROSS HANDWHEEL, GRADUATION...................0.0002"
...CROSS, FINE FEED KNOB GRADUATION..............0.0001"
...RAPID TRAVERSE POSITIONING....................150 IPM
...RAPID VERTICAL POWER POSITIONING..............40 IPM
...VERTICAL HANDWHEEL, GRADUATION................0.0002"
...VERTICAL, FINE FEED KNOB GRADUATION...........0.0001"
...APPROX. WEIGHT OF MACHINE.....................5,000 LBS.
EQUIPPED WITH:
...HYDRAULIC LONGITUDINAL & CROSS FEEDS
...POWER RAPID WHEELHEAD POSITIONING (UP & DOWN)
...10" x 30" HITACHI FINE POLE ELECTROMAGNETIC CHUCK
...COOLANT SYSTEM
...AUTO LUBRICATION
...B & S SUPER-PRECISION DIRECT DRIVE SPINDLE

TOOL AND CUTTER GRINDER

- - - - - - - - -

-Several available:
-Makino,cincinnati, jackmill, jones & shipman,and much more
-With any imaginable tooling
-Guaranteed,delivered,most as new condition

FAVRETTO SURFACE GRINDER 12 X 48

K.O.LEE radius-tangent toll grinder
Model:RT 300

- - - - - - - -

SPECIFICATIONS:
-Max cutter dia:12-3/4``
Radius:5-1/2``
Wheelhead traverse:12-1/2``
Wheelhead stroke:8-1/2
Table:8`` x 11``
Rotaty movement:210 deg
Rpm:5800/3800
Motor:2 HP
Weight:1150lbs

SENECA FALLS

Form relief grinder

with:comparator, motorized relief fixture,collets,variable speeds internal spindle,digital read outs and much more

For more informations / Pour plus d'informations

Haut

2003-06-23