Front Turn Signal Bulb Replacement
1-
Jack the front of the car.
2-
Remove the font fascia lower closeout panel. Small (if I recall 6 x
10 inches) piece of plastic under the front fascia at the left and
right corner.
3-
Release the brake caliper cooling duct from the front fascia, then
reposition the duct. You pull the brake duct and move it so you have
access to the lamp assembly.
4-
Remove the appropriate socket from the lamp assembly.
5-
Remove the bulb from the socket.
Remove the turn lamp assembly: Just remove One 10 mm screw, a
spring and the small screw on the assembly.
