Targa Top Ajutment
There
are five adjustment procedures for aligning the roof lift off panel.
Perform the appropriate adjustment(s) as necessary.
1. To adjust
the front striker perform the following steps:
1.1
Loosen the bolts and reposition the latch striker up or down for major
adjustment.
1.2
Loosen the
striker outboard bolt and pivot the striker on a slightly loosened
inboard bolt in 2mm (.08in) increments for minor up or down roof
adjustment.
2. To adjust
the front latch handle perform the following steps:
2.1
Loose the latch handle bolts.
2.2
Reposition the
latch handle forward or reward. Maintain a minimum of 2mm clearance
between latch handle and the latch striker to avoid squeaks and rattles.
2.3
Assure the latch handle base is parallel to the striker to provide
clr4earance tot the sunshade mirror door.
3. For major
rear latch adjustment adjust the rear latch striker performing the
following steps:
3.1
Remove the roof lift off panel.
3.2
Remove the roof and bow center interior trim panel.
3.3
Loosen the rear latch striker attaching bolts.
3.4
Adjust the position of the latch striker.
3.5
Tighten the striker attaching bolts. Tighten the roof rear striker
bolts to 89lbs.
3.6
Install the roof lift off panel.
4. For minor
rear
latch adjustment adjust the latch handle hook one turn at a time to
achieve moderate pressure to the latch as follows.
4.1
Remove the roof lift off panel.
4.2
Loosen the set screw locking the latch hook.
4.3
Turn the hook in to tighten or out to loosen.
4.4
Tighten the set screw.
4.5
Install the roof panel.
5. To adjust
the rear locator perform following steps.
5.1
With roof installed on the vehicle loosen the locator mounting bolts.
5.2
Reposition the locator.
5.3
Retighten the mounting bolts. Tighten bolt 89lbs.