Window
adjustment
Minor (use
this procedure when the window height is off less than 0.12in or 3mm.)
1- Open the
door and remove the small front access plug and the rear access plug
from the underside of the door.
2- Adjust the
front and the rear window regulator jack screws equally.
3- Close the
door and check the window alignment.
4- Open the
door and install the access plugs.
Major.
1 remove door
trim panel.
2- Reconnect
the window switch to the harness
3- Raise the
door window
4- Remove the
window clamp sight access plug
5- Loosen the
window clamps
6- Close the
door
7- With the
aid of an assistant standing outside of the vehicle position the window
to the door opening.
8- From the
inside of the vehicle tighten the window clamp
9- Open the
door and install the window clamp sight access plugs
10- Install
the door trim panel.
11- Perform
minor height and minor tip-in adjustments as necessary.